Datasheet

2. BWR mode & LUT from OTP
BUSY=Low
BUSY=Low BUSY=High
BUSY=High
Note1: Set border to floating.
System power
Reset the EPD driver IC
Power on
SPI (0x04)
Check BUSY pin
Panel setting
SPI (0x00,0x1f)
Display refresh
SPI (0x12)
Check BUSY pin
Power off
SPI (0x02)
Deep sleep
SPI (0x07,0xa5)
Data start transmission 1
SPI (0x10)
Transport old data
Data start transmission 2
SPI (0x13)
Transport new data
Vcom and data interval setting
SPI (0x50,value)
Note1
Booster soft start
SPI (0x06,0x17,0x17,0x17)
Resolution setting
SPI (0x61,0x01,0x90,0x01,0x2c)
Vcom and data interval setting
SPI (0x50,0x87)
4.2" e-Paper
www.waveshare.com
38／45