User Manual
10.1inch HDMI LCD (B) User Manual
Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not
work. For more detail information, please read the following section.
At the beginning, you should download the latest image file, RASPBIAN or
UBUNTU MATE, from the website: http://www.raspberrypi.org/downloads/.
1. Download the image file (zipped) into your PC, and extract it, then you will get a
file with the expansion name .img
2. Connect a TF card to your PC and format your TF card with the software SD
Formatter. Notices: The capability of TF card in used here should be more than
4GB. In this operation, a TF card reader is also required, which should be
purchased separately.
3. Start the software Win32DiskImager, and select image file downloaded in the first
step, then, click the button Write to program the system image file.
4. When the programming finished, open the config.txt file under the root directory
in the TF card, and add the following lines at the end of the file. Then, save the
modification and pop-out the TF card.
max_usb_current=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 1280 800 60 6 0 0 0
hdmi_drive=1
5. If the statements above do not work properly, replace them with the following
lines: