User Manual

10.1inch HDMI LCD (B) User Manual
3. Connect the Touch interface of the LCD to one of the USB interfaces on your Pi.
4. Insert a TF card into the TF card socket on the Raspberry Pi, and then power up
the Pi. Waiting for a while, you may see the following interface. (Now, you can
control the back light of the LCD with the back light adjustment button; see the
mark 1 shows in the following figure.)
ROTATION
Display Rotating
1. To rotating the display, you can append this statement to the config file
display_rotate=1 #1: 90; 2: 180; 3: 270
2. Reboot the Raspberry Pi
sudo reboot
Touch Rotating
Note: To rotate the touch, you can re-compile the kernel as well. There is an example
for reference (use 7inch HDMI LCD (C).)
⚫ Re-Compilation Method
Another way, you can set the libinput.
1. Install libinput