User Manual

10.1inch HDMI LCD (B) User Manual
max_usb_current=1
hdmi_group=2
hdmi_mode=27
hdmi_drive=1
HARDWARE CONNECTION
1. Connect the Power Only interface of the LCD to a 5V 2.5A power adapter with a
Type A to micro USB cable (Normally, the LCD will perform screen-clear and self-
checking. If there is nothing displayed on the screen, please check whether the
LCD screen has been turned on. In case that the screen is ON, please check if the
FFC cable is connected properly and in a good contact).
2. Connect the HDMI interface of the LCD to the HDMI interface on your Raspberry
Pi with a HDMI cable