User manual

15
The following example shows how to set up the dipswitches: Slide the
dipswitches toward the “ON” marking to turn them on; slide them in the opposite
direction to turn them off.
The dipswitches provide the following functionality:
OFF
ON
DIP 1
Selects 44.1/48kHz mode
(when emulation mode is selected)
Selects 88.2/96kHz mode
(when emulation mode is selected)
DIP 2
Selects Emulation mode
Selects Native/generic mode
DIP 3
Normal operation
Recovery mode
DIP 4
N/A
N/A
Notes: Native mode can only be used with mixing consoles that support such a
mode; please refer to the console manual. When in Native mode, the card will auto-
detect the frequency; DIP 1 is ignored. When in doubt, use Emulation mode.