User Guide

Waves V-Series
page 11
Adjustable in 0.1 dB increments from -18 dB to +18 dB.
Trim meter and reset button
Measures the peak output of the EQ device, measured in dBFS.
Click on the Trim to reset the output of the V-EQ4 to -0.1dBFS. A
red clip light indicates over-level. Click on the light to reset.
Analogue on/off
The V-EQ4 achieves an accurate vintage sound by recreating the unique
harmonic distortion and noise characteristics (and therefore the sound color) of the 1081
hardware device after which it was modeled. You can defeat these attributes to achieve
a modern-sounding EQ. Turning off both the Analogue and EQ removes all modeling.
You can also use your host application’s bypass function to ignore the device entirely.