User Guide

Waves V-Series
page 10
Shelf/Bell (separate controls for LF and HF sections)
Sets the shape of the LF and HF curves. The default for each of these filters is
shelf. Selecting this button changes the shape to a bell curve.
LMF (Low Mid Frequency Section)
Controls low middle frequency gain and cutoff frequency.
Inner knob controls gain. High Q Bell gain adjustment ±18 dB (lower for
normal Q), continuously adjustable.
Outer ring selects mid frequency cutoff points, plus off.
V-EQ4 LMF cutoff points (Hz): 220, 270, 330, 390, 470, 560, 680, 820, 1000, 1200
Hi Q (applicable to LMF and HMF sections)
Independently sets the LMF or HMF bell curves to a higher (steeper) Q.
The default is low Q. Selecting the button results in High Q.
High Q is ±18dB.
HMF (High Mid Frequency Section)
Controls high middle frequency gain and cutoff frequency.
Inner knob controls gain. High Q Bell gain adjustment ±18 dB (lower for
normal Q), continuously adjustable.
Outer ring selects mid frequency cutoff points, plus off.
V-EQ4 LMF cutoff points (kHz): 1.5, 1.8, 2.2, 2.7, 3.3, 3.9, 4.7, 5.6, 8.2
HF (High Frequency Section)
Controls high frequency gain and cutoff frequency of the HF filter.
Switchable between shelf (default) and bell.
Continuously variable gain ±18 dB.
V-EQ4 HF cutoff points (kHz): 3.3, 4.7, 6.8, 10, 15
Output
Controls the output level of the EQ device.