User Guide
Table Of Contents
Waves Greg Wells ToneCentric User Guide page 8
Tone
Determines how much processing is applied to the signal.
Range 0 (min) to 100 (max) in 0.1 increments.
Default: 0 Reset: 0
Output
Adjusts the plugin’s output level.
Your output level will not change when you load a preset.
Range: -18 to 18 dB in 0.1-dB increments
Default: 0 Reset: 0
Analog Noise
Greg Wells Tone Centric is modeled after specific elements in the analog signal flow. Part of this
modeling includes adding a small amount of noise. You can use ToneCentric processing without the
analog noise to achieve a very clean, but slightly different, sound. Open the Toolbar menu in the
upper right corner of the plugin to turn analog noise on or off. Default: off.
3.3 WaveSystem Toolbar
Use the bar at the top of the plugin to save and load presets, compare settings, undo and redo steps, and resize the plugin.
To learn more, click the icon at the upper-right corner of the window and open the WaveSystem Guide.