Eddie Kramer Master Tape Plug-In User Guide

VU CALIBRATION controls the VU meter headroom calibration. It is
represented by the small screw-head below the VU meter display and does not have a
visible label. For most users, the default headroom setting of 18 dB should be the best
choice. (On the Stereo component, use the screw located on the left to calibrate both
meters.)
Range: -24 dBFS – -8 dBFS
Default: -18 dBFS
DELAY TIME controls the time of the tape delay effect, with settings for 7.5
ips (266 milliseconds) and 15 ips (133 ms).
Range: 1 ms – 500 ms (continuous)
Default: 133 ms (15 ips)
DELAY TYPE toggles between delay modes.
Range: Slap, Feedback
Default: Feedback
DELAY LEVEL controls the amount of the delayed output signal.
Range: Off – 100
Default: Off
Waves Kramer Master Tape
User Guide
11