Eddie Kramer Master Tape Plug-In User Guide

3.2 Controls
SPEED selects the simulated tape speed.
Range: 7.5 ips, 15 ips
Default: 15 ips
When switching between the two speeds, the no
ise and frequency response will change
accordingly; at 15 ips, high frequency response is increased
and noise is one octave
higher than at 7.5 ips.
MONITOR selects the monitoring mode.
Range: Repro, Input
Default: Repro
Repro mode
monitors input stage, tape stage and output stage; Input mode monitors only
the input tub
e stage of th
e reference
machine, before it goes to tape, prior to the pre-
emphasis and de-emphasis filters.
BIAS controls the level of the ultrasonic bias signal.
Range: Nominal, Over
Default: Ove
r
VU METER displays input or output level, depending on your selection.
Range: -20 dBVU – +3
dBVU
Waves Kramer Master Tape
User Guide
10