Eddie Kramer HLS Channel Plug-In User Guide

Meter toggles the meter display between input and output monitoring.
Clip LED lights up when levels exceed 0 dBFS. Click to reset.
VU Meter displays input or output level in dBVU. Please note: The HLS Stereo component meter
displays the sum of both channels. The same signal fed to both channels will show an increase of 6 dB. If
this is problematic, use the VU Calibration function to compensate.
Range
24 – 8 dB
Default
18 dB of headroom (0 dBVU = -18 dBFS.)
VU Calibrate controls the VU meter headroom calibration.
Please note: The VU Calibration control is represented by the little screw-head right below the VU
meter display. It does not have a visible label and, for most users, the 18 dB default headroom
should be the best choice. However, if you use outboard gear in your studio and your VU meters
are calibrated for 14 dB headroom, the HLS allows you to calibrate its VU meter as well.
Waves Kramer HLS
User Guide
12