Eddie Kramer HLS Channel Plug-In User Guide

EQ Cut turns the EQ on (in) and off (cut), while maintaining the analog and preamp characteristics.
Range:
In/Cut
Default:
In
Analog controls turns the analog noise and hum modeling on and off, and sets the pitch of the hum to
match either European or American currents. To retain only the modeled harmonic distortion, bypass
the noise and hum by setting Analog to Off.
Range
50 Hz, 60 Hz, On/Off
Default
60 Hz
Noise pads the modeled noise and hum by 20 dB. If the noise level is excessive, set the Noise switch to
Low.
Range
Original, Low
Default
Original
Waves Kramer HLS
User Guide
11
Phase Invert reverses the phase of the signal in the plugin
Range: Invert off or on
Default: Off