Eddie Kramer HLS Channel Plug-In User Guide

Mid Mode selects between boost (PK) and cut (TR).
Range
PK (boost), TR (cut)
Default
PK
Low Band Freq/Cut From 60 to 400, this knob is used to select the boost frequency. From 3 to 15, it is
used to select the amount of attenuation (in dB) of the 50 Hz low shelf.
LF Selection (upper half)
0 (Off) to 400 (60, 120, 250, 400 Hz)
50 Hz Attenuation (lower half)
0 (Off) to 15 (-3, -6, -9, -12, -15 dB)
Default
0 (Off)
Low Band Boost sets the amount of boost (in d
B
) for the frequency selected using the Low Band
Freq/Cut control described above.
Range
0 to 15 (15 dB boost in 0.1 steps)
Default
0
Waves Kramer HLS
User Guide
10