User Guide
Table Of Contents
- Introduction
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Assigning Devices: Inventory Page
- Network Control Section (Top)
- Assignment Slots
- Device Rack Elements
- I/O Device Assignment Slots
- Assigned Hardware I/IO Devices
- Offline Devices
- Software Device (Driver)
- Servers Assignment Slots
- Controllers Assignment Slots
- Assigning I/O Devices
- I/O Device Icon Indicators
- I/O Devices Menu Items
- Setting Clock Master
- Certain device menu items apply only to drivers.
- Working with Multiple Systems
- Servers
- Settings Page
- Assigning Devices: Inventory Page
- Part 4: Patch Window
- Part 5: Rack Window
- Part 6: Overview Windows
- Part 7: Show Window
- Supplementary Material
SuperRack SoundGrid / User Guide
61
Assigning Controllers
The Controllers slots at the bottom of the System Inventory page are used to assign up to five control devices. These
devices can be used to control SuperRack functions.
Click on a controller slot to open the drop-down menu and
select a controller protocol. All installed controller drivers appear in the list, whether the device is present or not.
Controller device status is displayed on the device icon.
N/A: Device corresponding to selected protocol is not present or not functioning properly.
On: Device is present and operational.
Once a controller is selected and functioning properly, click on the Gear button to open its control panel.