User Guide
Table Of Contents
- Introduction
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Assigning Devices: Inventory Page
- Network Control Section (Top)
- Assignment Slots
- Device Rack Elements
- I/O Device Assignment Slots
- Assigned Hardware I/IO Devices
- Offline Devices
- Software Device (Driver)
- Servers Assignment Slots
- Controllers Assignment Slots
- Assigning I/O Devices
- I/O Device Icon Indicators
- I/O Devices Menu Items
- Setting Clock Master
- Certain device menu items apply only to drivers.
- Working with Multiple Systems
- Servers
- Settings Page
- Assigning Devices: Inventory Page
- Part 4: Patch Window
- Part 5: Rack Window
- Part 6: Overview Windows
- Part 7: Show Window
- Supplementary Material
SuperRack SoundGrid / User Guide
22
Part 2: Top Bar
At the top of the interface is a control ribbon called the Top Bar. It plays an important role in controlling SuperRack.
We suggest that you read this chapter before moving on.
Rack Controls Window Select Snapshots and Utilities
The Top Bar is visible from every SuperRack window. It includes the menus, information boxes, system feedback,
and navigation tools that you need all the time.
The Top Bar is used, among other things, to:
• Navigate to and select a rack
• Assign a rack to link groups
• Assign a rack to a latency alignment group
• Save, load, and manage rack presets
• Save and load sessions
• Switch between windows
• Load and store snapshots
• Monitor DSP status
• Set and monitor BPM
• Lock the mixer interface and access on-screen keyboard