User Guide
Table Of Contents
- Introduction
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Assigning Devices: Inventory Page
- Network Control Section (Top)
- Assignment Slots
- Device Rack Elements
- I/O Device Assignment Slots
- Assigned Hardware I/IO Devices
- Offline Devices
- Software Device (Driver)
- Servers Assignment Slots
- Controllers Assignment Slots
- Assigning I/O Devices
- I/O Device Icon Indicators
- I/O Devices Menu Items
- Setting Clock Master
- Certain device menu items apply only to drivers.
- Working with Multiple Systems
- Servers
- Settings Page
- Assigning Devices: Inventory Page
- Part 4: Patch Window
- Part 5: Rack Window
- Part 6: Overview Windows
- Part 7: Show Window
- Supplementary Material
SuperRack SoundGrid / User Guide
105
Selecting Rack Input
Assigning rack inputs in the Overview window is the same as in the Rack menu.
Choose an Input Set
Each rack has two inputs: Input I/O Banks A and B. A rack’s inputs can patch to different device
channels, but they must have the same channel format. The I/O bank selector is immediately
above the input meter.
Once the I/O Bank is set, you are ready to route the input channels.
Route Inputs