Specifications

® Waves System V 1.0 - 2005

I.D.AL - Module 2 for SP603/703 - Ethernet Board - ManualI.D.AL - Module 2 for SP603/703 - Ethernet Board - Manual

I.D.AL - Module 2 for SP603/703 - Ethernet Board - Manual

- 4 -

4. Examples of connection

4.1 - Connect the player to internet without network nor computer using a DSL

Modem/Router

- SPx03 player + Ethernet board (module 2)

- DSL Modem / Router

Remote computer

DSL Modem/Router

RJ45 connector

- Connect your player to your DSL Modem/Router ADSL using a RJ45 cable

- Connect your Modem to the Internet line (same as for a PC).

A - You have a fix IP from your provider

- Configure your Modem/Router and enter the player IP address, (see configuration manual to modify the

IP address), provider information (user, password ...), the gateway and other Modem configuration

settings.

- Open communication ports FTP (20:21) and ports HTTP (80)

Using the browser on a internet connected computer, enter the IP address of the Modem/player.

The user/password window opens up. Go to chapter 5.

B - You have no fix IP address

Hereafter is a solution to detect your player on the internet without a fix IP.

We suggest you to use a service provider proposing "Dynamic DNS" (DynDNS). Each time your IP

changes, the DynDNS database modify the IP address to the new one. This service is available for free

on the site "www.dyndns.org".

As a first stage, you must open an account with a provider and get your host name, user name and

password. Note : your Modem must support this feature.