Specifications

® Waves System V 1.0 - 2005

I.D.AL - Module 2 for SP603/703 - Ethernet Board - ManualI.D.AL - Module 2 for SP603/703 - Ethernet Board - Manual

I.D.AL - Module 2 for SP603/703 - Ethernet Board - Manual

- 2 -

WARNING: DO NOT EXPOSE TO MOISTURE AND DUST!

Unplug the power cord before any intervention!

FOR YOUR SAFETY, PLEASE READ CAREFULLY THIS OPERATION MANUAL

BEFORE USING YOUR PLAYER.

1. SAFETY INSTRUCTIONS

Please, refer to the main manual for more instructions.

2. PRODUCT INFORMATION

2.1 Correct usage

The ID-AL player is designed for automatically broadcasting music or audio files.

Correct usage implies observation of the instructions in this manual as well as observing the require-

ments concerning installation.

2.2 Incorrect usage

Any other use beyond this is considered as incorrect usage. The manufacturer will not be liable for any

damage resulting from incorrect usage. The operator carries all risks.

2.3 TECHNICAL SPECIFICATIONS

Ethernet board for SP603/SP703 player : Module 2

Network : 32 bits Ethernet

Ethernet Connector : RJ45 UTP/STP

Modem Connector : SubD 9pts for analog Modem 56k. RS232 serial link

2.4 INSTALLATION

The apparatus must be set up in a dry and dust-free room.

Do not install the player too close to a wall. To avoid overheating, the ventilation holes must

be kept clear and an air circulation gap must be left above the unit.

2.5 ELECTRICAL CONNECTION

Before use, compare mains voltage with that specified on model plate.