Specifications

® Waves System V 1.0 - 2005

I.D.AL - Module 2 for SP603/703 - Ethernet Board - ManualI.D.AL - Module 2 for SP603/703 - Ethernet Board - Manual

I.D.AL - Module 2 for SP603/703 - Ethernet Board - Manual

- 16 -

7. Use of an analog modem

You can connect an analog modem to the modem socket of the player in order to establish a direct link

between your computer and the player through an analog telephone line.

To do so, you must first create a connection on your PC.

- Create a new connection on your system.

- Fill in all the fields including the telephone number of the line

on which your modem/player is connected.

- Select the type of server "PPP ....."

- Validate the TCP/IP internet protocol and configure the IP

address of your player in PPP mode.

To call the modem/player, start a connection on your PC. The computer

will then dial the specified number and start the connecting procedure.

Enter the user name and password that you have previously

configured in the player.

Default user name is : idalppp

and default password is : idalppp

The modem detects the call and transfers the information to the player

which gives the order to pick up the incoming call. After data have been exchanged and providing that all

the parameters have been correctly set, a direct connection between PC and player is established. You

can then use your internet explorer (see chapter 4) or your FTP software (see chapter 5) to control and

configure the player or transfer files into the HDD as you would do with a network connection.