JJP Vocals Plug-In User Guide

Sensitivity Section
The Sensitivity LED’s 3 colors indicate when appropriate levels are reached:
 LED Off (too low)
 Green (good)
 Yellow (optimal)
 Red (very hot)
Turn the Sensitivity Control until the LED lights up. For best results, use the section of
your track with the highe
st peaks.
In most cases, the Sensitivity LED in
dicates that your levels hit the processor in a way
that will give you the intended output
result. However, it’s important to kee
p in mind that
optimal results for your source material may be achieved even when the Sensitivity LED
does not display “optimal” levels (yellow). As always, trust your ears.
Main Section
The Main Section gives you control over basic dynamics & EQ. All processing is
influenced by this section.
Main Fader
The Main Fader controls the Main Section direct level.
Center Section Faders
The Center Section faders represent auxiliary returns with additional processing, sent
from the Main Section, pre-fader. Above each fader, there is a dedicated mute button.
It may help to think of each plug-in as a mini-mixing console.
Please note: Certain faders may change, depending on the selected Type. This is
intentional, and represe
nts the actual processing JJP uses for that source or instrument.
Waves JJP Vocals
User Guide
- 7 -