CLA Vocal Plug-In User Guide

Waves CLA Vocals
User Guide
- 8 -
3.2 Controls
Input
Sensitivity is used to achieve optimal plug-in input level.
Range: +/- 10 (in 0.1 steps)
Default: 0
Input
Meter displays input signal peak level.
Range: -26 to 0 dBFS
Clip LED lights up when levels exceed 0 dBFS. Click inside the meter area to reset.
B
alance adjusts the offset between left and right signals. (Stereo component only)
Range: +/- 6 dB (in 0.1 steps)
Default: 0
S
ensitivity LED indicates the presence of proper levels.
Range: LED off (too low), Green (good), Yellow (optimal), Red (very hot)