Quick Start Guide

SoundGrid Servers / Quick Start Guide
6
Minimum Network Latency Settings
The Network Latency is the round trip from the SoundGrid I/O to the SoundGrid
server and back. This determines the speed of real-time processing. Lower
settings result in lower system latency and greater responsiveness. Higher
settings yield more stability but greater latency.
If you encounter pops or similar errors, increase the buffer setting. The buffer size
is set in samples but is also displayed in milliseconds. This setting is controlled
through the SoundGrid host. Click on the server’s icon menu in the Servers Rack and
select Server Network Buffer. The default network latency is 0.8 ms.
Cleaning the Dust Filters
A 2U server has two dust filters that should be cleaned periodically and replaced if damaged. Remove the four screws on
the front panel to expose the filters.
Battery Disposal Information
CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible.
Disposal of used batteries must be in accordance with local environmental regulations.