Quick Start Guide

SoundGrid Servers / Quick Start Guide
2
The SoundGrid Server (SGS)
This quick start guide provides basic instructions for setting up a SoundGrid server in a SoundGrid network. It covers these
models:
• Proton Server
• One-C Server X10
• Extreme-C Server X10
• Extreme Server X10
• Titan Server
• Titan-R Server
Installation is the same for all series, except for network connectors and power sources. The SoundGrid server software is pre-
installed on the SoundGrid server’s internal flash disk. Once you connect and turn on the server and launch the host
application, the host will recognize the server and you’ll be up and running. The host may prompt you to update the server
firmware. Follow the on-screen prompts.
Detailed product descriptions and specifications can be found on each server’s product page at www.waves.com.
For in-depth setup instructions about SoundGrid configurations, please refer to the user guided for your SoundGrid-compatible
host application.