Specifications

Audio Plug-Ins Guide78
Dynamics III Side-Chain LF Frequency
Control
The Frequency control sets the frequency posi-
tion for the Band-Pass or High Pass filter, and
ranges from 25 Hz to 4 kHz.
Using Dynamics III Key Input for
Side-Chain Processing
To use a filtered or unfiltered external key input to
trigger dynamics processing:
1 Click the Key Input selector and select the in-
put or bus carrying the audio from the reference
track or external audio source.
2 Click External Key to activate external side-
chain processing.
3 To listen to the signal that will be used to con-
trol side-chain input, click Side-Chain Listen to
enable it (highlighted).
4 To filter the key input so that only specific fre-
quencies trigger the plug-in, use the HF and LF
controls to select the desired frequency range.
5 Begin playback. The plug-in uses the input or
bus that you chose as an external key input to
trigger its effect.
6 Adjust the plug-in’s Threshold (Thresh) con-
trol to fine-tune external key input triggering.
7 Adjust other controls to achieve the desired ef-
fect.
High Pass filter
LF frequency controls
Selecting a Key Input
External Key
Side-Chain Listen