Specifications

Chapter 11: Dynamics III 77
Dynamics III Side-Chain High-
Frequency (HF) Filter Type
The HF filter section lets you filter higher fre-
quencies out of the side-chain signal so that only
certain bands of high frequencies or lower fre-
quencies pass through to trigger dynamics pro-
cessing. The HF side-chain filter is switchable
between Band Pass and Low Pass filters.
Band Pass Filter Makes triggering of dynamics
processing more sensitive to frequencies within
the narrow band centered around the Frequency
setting, and rolling off at a slope of 12 dB per oc-
tave.
Low Pass Filter Makes triggering of dynamics
processing more sensitive to frequencies below
the Frequency setting rolling off at a slope of
12 dB per octave.
Dynamics III Side-Chain HF Frequency
Control
The HF frequency control sets the frequency po-
sition for the Band Pass or Low Pass filter, and
ranges from 80 Hz to 20 kHz.
Dynamics III Side-Chain Low-Frequency
(LF) Filter Type
The LF filter section lets you filter lower fre-
quencies out of the side-chain signal so that only
certain bands of low frequencies or higher fre-
quencies are allowed to pass through to trigger
dynamics processing. The LF side-chain is swit-
chable between Band Pass and High Pass filters.
Band-Pass Filter Makes triggering of dynamics
processing more sensitive to frequencies within
the narrow band centered around the Frequency
setting, and rolling off at a slope of 12 dB per oc-
tave.
High Pass Filter Makes triggering of dynamics
processing more sensitive to frequencies above
the Frequency setting rolling off at a slope of
12 dB per octave.
Band-Pass filter
Low Pass filter
HF frequency controls
Band-Pass filter