Specifications

Audio Plug-Ins Guide598
Range (–100 to +100%) Use the Beginning (BEG)
and End (END) parameters to control the mix
between the A and B sounds. You can set both
start and stop points to determine the range of
modulation by the LFOs. A value of –100% sets
the crossfade fader to the full left position (the A
sound), 0% is an equal mix of the and A and B
sounds, and 100% sets the crossfade fader to the
full right position (the B sound).
LFO Set the Waveshape and Duration for dy-
namic crossfade effects. For static crossfade set-
tings, set both LFO1 and LFO2 to Off.
Synchronic MIDI Module
Overview
(RTAS Only)
The MIDI module lets you assign MIDI note
numbers and continuous controllers to the Pre-
sets and User Knobs of the Sound, Playback, Ef-
fect, and XFade modules.
You can toggle between MIDI Performance
mode (see “Synchronic MIDI Performance
Mode” on page 598) and MIDI Edit mode (see
“Synchronic MIDI Edit Mode” on page 600).
Synchronic MIDI
Performance Mode
In Performance mode, the MIDI module dis-
plays a one octave on-screen keyboard. Octave
Transpose buttons lets you shift the focus of the
on-screen keyboard to any octave (from MIDI
note number 1 to 127).
Synchronic On-Screen Keyboard
In Performance mode, the MIDI module pro-
vides an on-screen keyboard that can be used to
assign MIDI note numbers to store and recall
the current state of Synchronic settings. You can
also recall stored combinations of Synchronic
presets and settings by clicking the correspond-
ing key on the on-screen keyboard.
Octave (OCT) Up and Down Arrow Buttons Click
the left arrow to transpose the on-screen key-
board down an octave or click the right arrow to
transpose the on-screen keyboard up an octave.
This lets you readily assign Synchronic preset
snapshots to any and all octaves of your MIDI
keyboard.
Octave Display Displays the current octave
transposition of the on-screen MIDI keyboard.
C3 is middle C.
LFO Waveshapes and Durations options are
the same as those provided in the Playback
module. See “Low Frequency Oscillator
(LFO)” on page 589.
Since there are twelve presets for each mod-
ule, you can comfortably map your MIDI
keyboard controller to the presets for each
module by octaves.
MIDI module, Performance mode
Performance/Edit
Mode toggle
On-screen Keyboard
Transpose
Octave Down
Transpose
Octave Up
button
button
Octave
Wait
Transposition
display
button
Assign
button