Specifications

Chapter 97: Eleven Input Calibration and QuickStart 537
Using Eleven with Pre-Recorded
Tracks
If the pre-recorded tracks were not calibrated
with the Eleven plug-in using the method previ-
ously described, you can use the Input control in
Eleven to adjust the signal level feeding the in-
put stage of the amp model.
Use your ears as a guide and adjust to taste.
Since the Input LED measures the signal level
entering the plug-in and precedes the input con-
trol, you will not see any changes to the Input
LED as you make adjustments.
Getting Started Playing
Music with Eleven
To get started playing music with Eleven:
1 Make sure you already calibrated your input
signal as explained in the previous sections of
this chapter.
2 Click the plug-in’s Librarian menu and choose
a factory preset, then play guitar. Take your time
to explore — the Presets let you hear all of
Eleven’s different amps and combos.
3 Pick any amp and cabinet from the available
types (see “Pairing Amps and Cabinets” on
page 546.)
4 Turn to Chapter 98, “Using Eleven” for specific
details on Eleven’s main controls, and for sug-
gested track setups for recording, jamming, and
mixing.
See “Processing Pre-Recorded Tracks
Through Eleven” on page 551 for more infor-
mation.
Librarian menu (left) and the Settings menu (right)
Use the Settings menu to save, copy, paste,
and manage plug-in settings files. To save a
setting, see “Eleven Settings (Presets)” on
page 541.