Specifications

Audio Plug-Ins Guide506
Octave Buttons
The octave range of 0–6 displayed in TL InTune
is based on middle C being equal to C4. In chro-
matic presets, you can select the desired tuning
octave from 0–6 using the arrows at each end of
the note display.
TL InTune Tone Volume
The Tone Volume slider controls the volume of
the test tone audio signal.
TL InTune Information Display
The LCD style information display in TL InTune
displays the following:
• The reference frequency
• The current note to which TL InTune is tun-
ing
• The number of cents sharp or flat from the
current note
• The status of any test tones playing
TL InTune Presets
TL InTune provides a selection of factory pre-
sets for stringed instruments. These presets can
be selected from the Plug-In Librarian menu.
To make any preset the default when TL InTune is
instantiated:
1 From the Plug-In Librarian menu, select the
desired preset.
2 From the Plug-In Settings menu, select Set As
User Default
.
3 From the Plug-In Settings menu, select Set-
tings Preferences > Set Plug-In Default To > User
Setting
.
Octave buttons
Down Octave button
Up Octave button
Selecting a TL InTune preset
For more information on using plug-in pre-
sets in Pro Tools, see the
Pro Tools Refer-
ence Guide
.