Specifications

Audio Plug-Ins Guide504
TL InTune Controls and
Displays
TL InTune Auto Button
Click the Auto button to toggle Automatic Mode
on and off. When Automatic mode is active, TL
InTune will detect the note played and automat-
ically show the pitch for that note.
To enable Automatic mode:
 Click the Auto button to enable Automatic
mode. The Auto button highlights.
To tune to a single note and turn off Automatic
mode:
 Click the button for the desired note.
This turns off automatic mode. TL InTune will
now display pitch relative to the selected note
only.
TL InTune Test Tone Menu
Selector
TL InTune will generate both sine wave and tri-
angle wave test tones as shown in the tone menu.
The “Audible” tuning tone modulates the input
signal against the reference tone.
To hear a test tone:
1 Select Sine, Triangle, or Audible from the Test
Tone selector.
2 Click the Note button for the desired note.
3 Adjust the Tone Volume slider as desired.
When a test tone is playing, “Tone Playing” ap-
pears in the information display.
TL InTune Edit Button
Clicking the Edit button displays the Tuner Pro-
gramming screen, where you can create custom-
ized tuning presets that display note selections
for specific instruments and tunings. See “Cre-
ating TL InTune Tuning Presets” on page 507.
Selecting a note
Selecting a test tone
Selecting a test tone note