Specifications

Audio Plug-Ins Guide482
6 Adjust the parameter for which you want to re-
cord MIDI CC data. Parameter changes are re-
corded to the Pro Tools MIDI track as CC data.
7 When you are done adjusting the parameter,
return to Pro Tools and stop recording.
8 Record disable the MIDI track.
9 From the MIDI Track View selector in the Edit
window, select the view for the CC data you just
recorded.
Playing Back MIDI Continuous
Controller Data Over ReWire
Once you have recorded MIDI CC data from the
ReWire client application to a MIDI track, con-
figure the MIDI track to play the ReWire client
application. You can also edit the MIDI CC data
in Pro Tools until you achieve the best results.
To play back MIDI CC data over ReWire:
1 From the MIDI track’s MIDI Output selector,
select the ReWire client application device you
want to control (the same device from which you
recorded the MIDI CC data).
2 Start playback in Pro Tools.
3 Switch to the ReWire client application. Notice
that the corresponding parameter changes ac-
cording the MIDI CC data from Pro Tools.
Quitting ReWire Client
Applications
When quitting Pro Tools sessions that integrate
ReWire client applications, quit the client appli-
cation first, then quit Pro Tools.
Adjusting a parameter in a ReWire client application
(Reason’s SubTractor shown)
If your external MIDI controller is correctly
mapped to the corresponding ReWire client
application’s parameters, and it is correctly
routed through Pro Tools, use your MIDI
controller to adjust the parameter you want
to record.
MIDI CC data recorded from a ReWire client
application
If you quit Pro Tools before quitting ReWire
client applications, a warning dialog may
appear stating that “one or more ReWire
applications did not terminate.” To avoid
this, quit all ReWire client applications be-
fore quitting Pro Tools.