Specifications

Audio Plug-Ins Guide474
Rate
Move this knob to set the speed or rate of the
modulation wheel’s modulation. When using a
synchronized shape (such as Saw Sync), the Rate
control sets the speed in fixed, tempo synchro-
nized steps. When using other shapes (such as
Sine, Tri, and Saw), the LFO speed is freely ad-
justable.
Depth
This knob sets the strength or amount of how
much the signal is affected by the modulation.
Depth is a bipolar control, which means that it
can be set to positive or negative values.
Xpand!
2
Pressure Controls
Many MIDI keyboards provide pressure (also
called aftertouch) to generate a MIDI control
signal which depends on how hard you press
down held keys after the initial “note on.”
With Xpand!
2
you can use this control signal to
modulate a number of useful controls.
Pressure Destination
Select a destination for the modulation using
pressure (aftertouch) from the pop-up menu.
The following destinations for pressure action
are provided:
Mod Wheel Rate knob
Mod Wheel Depth knob
For example, with the modulation wheel’s
shape set to Const and destination to Pan,
moving the mod wheel up makes the signal
go to the left (negative Depth value) or to the
right (positive Depth value).
Pressure Destination button
Pressure
Destination
Description
Pitch Affects the Part’s pitch.
Wave Changes the sound in different
ways, depending on the
selected Part. For example,
shaping waveforms, FM modu-
lation depth, sample start point
offset, detuning.
Filter Affects the Part’s filter cutoff fre-
quency.
Volume Affects the Part’s volume level.