Specifications

Chapter 85: Xpand!2 469
Info Display
At the bottom of the Xpand!
2
plug-in window,
an Info display shows the setting of the cur-
rently selected control.
Xpand!
2
Part Controls
Each Part has a set of controls that address load-
ing patches, the Part’s place in the mix, and its
MIDI channel.
On the right, there is a display that can show
three sets of Patch Edit parameters, including
advanced MIDI settings, Arpeggiator controls,
and Modulation controls.
On/Off
Activate or deactivate the Part by clicking its
On/Off button. When the Part is activated the
Part character in its center is lit.
Part Selector
Click the Part selector to select the Part, so that
its Smart Knobs are displayed.
MIDI Channel Selector
To choose the MIDI channel that the current
part responds to, click the MIDI Channel Selec-
tor and select the channel from the pop-up
menu.
Category Selector
To view Parts organized by categories, click the
Category selector.
Part Name
To load a Part into the slot, click the Part Name
field and select a Part from the pop-up menu.
Level
Move the slider to set the Part volume level, in-
creasing volume to the right and decreasing to
the left. The meter above shows the slot’s audio
output.
Info display
Part On/Off button
Part selector
MIDI Channel selector
For details on how to assign MIDI control-
lers, see “Using the MIDI Learn Function on
Avid Virtual Instruments” on page 475.
Category selector
Part Name
Level slider