Specifications

Audio Plug-Ins Guide422
FX Send On Activates the Effect Send for the
patch.
FX Send Level Adjusts the level sent from the
patch to the Effect Send.
Structure Free Edit 2 Sub-Page Controls
Filter Section
Filter Type Selects a filter type.
Cutoff Adjusts the filter cutoff frequency.
Envelope Level Adjusts how strongly the filter
envelope modulates filter cutoff.
Filter Envelope Section
Attack Sets the time needed for the filter enve-
lope to reach its maximum value.
Hold Adjusts the length of the Filter envelope’s
Hold time.
Decay Adjusts the time for the filter envelope
needed to fall from hold level to sustain level.
Sustain Adjusts the level of the sustain segment.
The envelope’s signal remains on this level as
long as the note is held.
Release Adjusts the time for the envelope’s re-
lease segment to fall to zero when the note is re-
leased. Use shorter times for an immediate clos-
ing of the filter. Longer times cause the filter
cutoff to decay slowly.
Amplifier Section
Vel Sens (Velocity Sensitivity) Adjusts the enve-
lope velocity sensitivity (range in dB between
lowest and highest velocity).
Amp Envelope Section
Attack Softens the attack phase of Instruments
by applying an amplitude envelope to the start
of each Instrument hit. Move the control to the
right to increase the time needed for the attack
to rise to full amplitude.
Hold Adjusts the length of the Amp envelope’s
Hold time at the end of the attack phase.
Decay Shortens the played instrument hits by
applying an amplitude decay after the hold time.
Sustain Adjusts the level of the sustain segment.
The envelope’s signal remains at this level as
long as the note is held.
Release Adjusts the time for the release segment
to fall to zero when the note is released. Use
shorter times for an immediate stop of the
sound. Longer times cause the sound to fade out.