Specifications

Audio Plug-Ins Guide390
Timbrometer
This multicolor waveform display shows the am-
plitude and duration of the audio signal gener-
ated by Bruno as well as the frequency of timbral
changes and whether they are crossfaded or
switched.
Red and blue waveform segments indicate tim-
bral changes that are crossfaded. Green wave-
form segments indicate timbral changes that are
hard switched.
Bruno Amplitude Controls
Gain Amount
Gain Amount attenuates output level gain. Since
some of Bruno’s controls can cause extreme
changes in signal level, this is particularly useful
for preventing clipping and achieving unity gain
with the original signal level. This control is ad-
justable from a low of –96 dB (no gain) to a high
of 0.0 dB (maximum gain).
Gain Velocity
Gain Velocity sets the velocity sensitivity of the
Gain Amount control. This gives you touch-sen-
sitive control over Bruno’s volume using a MIDI
keyboard.
This control is adjustable from a low of –24 dB
(maximum velocity sensitivity) to a high of
0.0 dB (no velocity sensitivity).
If you set Gain Velocity to –24 dB, a soft strike
on a key will reduce gain up to –24 dB. A hard
strike will have a maximum output level equal to
the current dB setting of the Gain Amount con-
trol.
Conversely, if Gain Velocity is set to 0.0 dB,
Bruno’s volume will not change no matter how
hard or soft you strike a key on your MIDI con-
troller.
Mix
Mix adjusts the mix of the processed audio with
the original, unprocessed audio.
Spread
When Bruno is used in stereo, the Spread con-
trol can be used to pan multiple voices within
the stereo field. This control is adjustable from
0% (no stereo spread) to 100% (maximum stereo
spread).
Voice stacking has a direct effect on stereo
Spread. For example, setting Voice Stack to 1
and Spread to 100% will randomly pan each note
played. Setting Voice Stack to 4 and Spread to
100%, will pan two of the four voices hard left,
and two voices hard right.
Timbrometer
Amplitude controls
Gain Velocity only has an effect when you
play Bruno with a velocity-sensitive MIDI
controller.