Specifications

Audio Plug-Ins Guide368
TL AutoPan LFO Controls
The LFO section provides controls for the Low
Frequency Oscillator that can be used to modu-
late panning. The controls in the LFO section
only affect the panning if LFO is selected as the
panning source in the panning section (see
“Panning Source” on page 367).
Rate
The Rate slider adjusts the rate of the LFO in
beats per minute. When Link to Tempo is acti-
vated, the slider is ignored and the Tempo LCD
always displays the current session tempo (see
“Tempo LCD” on page 370).
Waveform
The Waveform selector determines the wave
shape used by the LFO. The waveform shape in
use is graphically depicted by the movement of
the Sound Location indicator in the Panning
display.
LFO Triggers
By default, the LFO cycles continuously through
the selected waveform. The LFO can be set to cy-
cle through the selected waveform just once, or
it can be triggered by MIDI Beat Clock, the En-
velope, or manually.
Single When the Single trigger is selected, the
LFO will cycle thru the waveform once only and
then stop.
Beat Clock When the Beat Clock trigger is se-
lected, the LFO synchronizes to MIDI Beat
Clock. TL AutoPan receives Beat Clock signal
every 64th-note. The Duration menu determines
how often the Beat Clock signal triggers TL Au-
LFO section
When the Panner section is set to Envelope
(ENV), the controls in the LFO section have
no effect on panning.
Selecting the LFO Waveform
LFO Triggers