Specifications

Chapter 75: TL AutoPan 367
Spread
The Spread slider opens or constricts the field of
panning. At 100%, the spread of the panning
field is at its greatest. At 0%, the spread of the
panning field is completely constricted, and the
sound is centered and stationary (left/right and
front/back).
The Spread slider is only available with mono-
to-quad and mono-to-5.0 formats, and a circular
path (clockwise or counterclockwise) selected.
Panning Source
Click LFO or ENV to select the source for pan-
ning. When the Source is set to LFO, panning is
controlled by the LFO and its controls (see
“TL AutoPan LFO Controls” on page 368). When
the Source is set to Envelope (ENV), panning is
controlled by the Envelope Detector and its con-
trols (see “TL AutoPan Envelope Controls” on
page 370). The Envelope Detector can be trig-
gered by the panned audio signal, or by a side-
chain input (see “Using the Side-Chain Input”
on page 371).
Panning Display
The Panning display graphically represents the
panning field and the location of the sound
source within that field.
Sound Location Indicator This bright yellow
light indicates the location of the sound source.
Panning Field Indicator This is the grey line on
which the yellow Sound Location indicator trav-
els and indicates the panning field.
Path
The Path selectors determine whether the audio
signal pans left to right, right to left, or in a cir-
cular motion clockwise, or counterclockwise.
The circular path selectors (clockwise and coun-
terclockwise) are only available with mono-to-
quad and mono-to-5.0 formats.
Panner section, mono-to-5.0, clockwise path selected
Panning Source buttons
Panning display, mono-to-5.0, left to right path
selected
Path selectors, left to right path selected