Specifications

Audio Plug-Ins Guide358
Phase
When enabled, the Phase button inverts the
phase of the channel input to the Down Mixer.
Level
You can adjust the level of the channel input to
the Down Mixer from –45 dB to +12 dB. For ste-
reo to mono down mixing, both the Left and
Right channels are mixed to summed mono. For
greater-than-stereo multichannel down mixing,
the following rules apply:
• All left-channel sources (L, Lc, Ls, Lss, Lsr)
feed to the left channel (L) of the down
mixer.
• All right-channel sources (R, Rc, Rs, Rss,
Rsr) feed to the right channel (R) of the
down mixer.
• The center channel (C) and low-frequency
channel (LFE) are panned center into the
stereo field of the down mixer.
Meter
The level meters for source channels always
show the input level (pre-fader) for the channel
regardless of the Source Level setting.
Downmix
The Downmix section of the Down Mixer
plug-in provides output meters and a single
fader to adjust the output level of the Down
Mixer from –45 dB to +12 dB.