Specifications

Chapter 64: AIR Lo Fi 315
Chapter 64: AIR Lo Fi
AIR Lo Fi is an RTAS plug-in that you can use to
bit-crush, down-sample, clip, rectify, and man-
gle an input signal.
AIR Lo Fi Controls
The Lo-Fi plug-in provides a variety of controls
for adjusting plug-in parameters.
Sample Rate
The Sample Rate control resamples the audio
signal at another sample rate.
Bit Depth
The Bit Depth control lets you truncate the bit
depth of the incoming signal from 16 bits all the
way down to 1 bit.
Mix
The Mix control adjusts the Mix between the
“wet” (processed) and “dry” (unprocessed) sig-
nal. 0% is all dry, and 100% is all wet, while 50%
is an equal mix of both.
AIR Lo Fi Anti-Alias Section
The Anti-Alias section provides control over
anti-aliasing filters that can be used before and
after downsampling to reduce aliasing in the re-
sampled audio signal.
Pre
The Pre control adjusts the anti-aliasing filter
cutoff applied to the audio signal before resam-
pling. The filter is applied as a multiplier of the
sample frequency (Fs) between 0.12 Fs and 2.00
Fs.
Post
The Post control adjusts the range of anti-alias-
ing filter cutoff applied to the audio signal after
resampling. The filter is applied as a multiplier
of the sample frequency (Fs) between 0.12 Fs
and 2.00 Fs.
On
For a much grittier sound, disable the Anti-Alias
filter. The Anti-Alias button is lit when the filter
is enabled.
Lo Fi Plug-In window