Specifications

Audio Plug-Ins Guide300
7 Set the Automation mode for the track to Write
or Touch.
8 Play the session
9 At the point where you wish phasing to start,
click on Manual Trigger to start the LFO. The au-
tomation for this action will be recorded onto
the track.
The Bypass and/or Depth controls can also be
automated to ensure TL EveryPhase does not ef-
fect any part of the sound except the specific
section required.
Creating a Gradual Phaser Effect
As an alternative to bypassing TL EveryPhase
when an effect isn’t needed, the Depth control
can be automated to introduce and fade out
TL EveryPhase on a track as required.
Adding Other Effects
For different phaser sounds, try using a com-
pressor before or after TL EveryPhase. Other
useful effect plug-ins to try with TL EveryPhase
include distortion, delay, and EQ.
Using TL EveryPhase Beat Clock
Triggers
The Beat Clock trigger lets you trigger the LFO
on specific bars and beats. Using the LFO Dura-
tion menu and the Beat Clock trigger, you can
restart the LFO as often as once every 16th-note.
This is useful when the tempo and timeline in a
Pro Tools session have been set to match the
music.
Manually Automating Triggers
If you want the phasing effect of TL EveryPhase
to match an irregular sound (such as a guitar
lead that doesn’t fall on a specific beat), manu-
ally automating the LFO Manual Trigger pro-
vides an alternative.
You can manually automate the LFO to trigger at
specific points in the session in a similar fashion
to that described above. The following figure
shows a guitar track with automation of the LFO
Manual Trigger at points which match key
phrases in the guitar playing.
Alternatively, with an appropriate audio signals,
using the LFO envelope trigger with the correct
threshold settings will trigger the LFO as
needed.
Using the TL EveryPhase Side-
Chain Input
The Side-Chain Input option in TL EveryPhase
lets you direct audio from another track in your
Pro Tools session to the Envelope Detector. This
is achieved by sending the audio from the de-
sired channel to a bus and setting the side-chain
input on TL EveryPhase to the same bus.
LFO Manual Trigger automation on a guitar track
Selecting a bus as the Side-Chain Input