Specifications

Audio Plug-Ins Guide282
Sine/Square The Square/Sine switch selects ei-
ther a square or sine waveform. The square wave
produces trill effects, whereas the sine wave-
form produces vibrato and siren effects.
Modulator Section
The Carrier Oscillator is controlled by the Fre-
quency knob and the Low/High switch.
Frequency Knob Operating at the selected fre-
quency, the carrier oscillator provides one input
to the ring modulator, with the other coming
from the input signal.
Lo In the Lo position, the Frequency knob
ranges from 0.5 Hz to 80 Hz.
Hi In the High position, the Frequency knob
ranges from 30 Hz to 4 kHz.
Mix The Mix control blends the input signal and
the Ring Modulator output. You hear only the
input signal when the knob is counterclockwise,
and only the ring modulated signal with the
knob fully clockwise.
Drive
The Drive control sets the input gain.
LED Indicators
Three LEDs provide visual feedback.
Level Level glows green when signal is present.
LFO LFO blinks to show the LFO rate.
Bypass Bypass glows either red (bypassed) or
green (not bypassed) to show whether or not the
effect is in the signal path.
Moogerfooger Ring Modulator
Tips and Tricks
A Little Goes a Long Way
You’ll discover tons of great uses for the
Moogerfooger Ring Modulator through experi-
mentation. But don’t forget to try using it in
subtle ways, adding “just a hint” to harshen up
or add a metallic quality to individual tracks
buried in the mix. Almost all the great MOOG
sounds feature subtle, clever uses of Ring Mod-
ulation.