Specifications

Chapter 53: Chorus 269
Chapter 53: Chorus
Chorus is an AudioSuite plug-in that adds a
shimmering quality to audio material by com-
bining a time-delayed, pitch-shifted copy of an
audio signal with itself.
Chorus Controls
The Chorus plug-in provides the following con-
trols:
Gain Adjusts the input volume of the chorus to
prevent clipping or increase the level of the pro-
cessed signal. This slider is set to a default of
+3 dB. If your source audio has been recorded
very close to peak level, this +3 dB default set-
ting could cause clipping. Use this control to re-
duce the input level.
Selecting the Sum Inputs button sums the dry
input signals (mono or stereo) before processing
them. The dry signal then appears in the center
of the stereo field and the wet, effected signal
will be output in stereo.
When the Sum Inputs button is selected, the
LFO waveform on the right channel is automat-
ically phase inverted to enhance the mono-ste-
reo effect.
Chorus plug-in
The Chorus plug-in was formerly called
D-fx Chorus. It is fully compatible with all
settings and presets created for D-fx Chorus.
Sum Inputs button