Specifications

Audio Plug-Ins Guide258
Filter
The Filter control switches the wah filter be-
tween LP (lowpass), BP (bandpass), and HP
(highpass) modes.
Mix
The Mix control lets you balance the amount of
dry signal with the amount of wet (wah-pro-
cessed) signal. At 50%, there are equal amounts
of dry and wet signal. At 0%, the output is all dry
and at 100% it is all wet
Mix (Overall)
The overall Mix control lets you balance the
amount of fuzz-processed signal with the
amount of wah-processed signal. At 50%, there
are equal amounts of fuzz and wah signal. At 0%,
the output is all fuzz, and at 100% it is all wah.
Fuzz-Wah Fuzz Section Controls
The Fuzz section provides tonal and volume
control over the plug-in.
Tone
The Tone control lets you change the brightness
of the Fuzz algorithm.
Output
The Output control sets the overall output vol-
ume of the Fuzz section.
Fuzz-Wah Pedal Min and Pedal
Max Section Controls
Freq
Sets the low (Pedal Min) and high (Pedal Max)
limits of the wah filter’s frequency sweep.
Res
Sets the low (Pedal Min) and high (Pedal Max)
limits of the wah filter’s resonance.
Fuzz-Wah Modulation Section
Controls
The Modulation section provides controls for
the Low Frequency Oscillator (LFO) and Enve-
lope Follower (ENV) that can be used to modu-
late the wah filter’s sweep.
Rate
The Rate control sets either the LFO frequency,
or the response time of the envelope follower,
depending on the setting of the Mode control.
Type
The Type control lets you select either the LFO
or the Envelope follower as the modulation
source for the wah filter.
Depth
The Depth control sets the amount of modula-
tion sent by the LFO or envelope follower.