Specifications

Chapter 43: AIR Chorus 249
Chapter 43: AIR Chorus
AIR Chorus is an RTAS plug-in that lets you ap-
ply a short modulated delay to give depth and
space to an audio signal.
AIR Chorus Controls
The Chorus plug-in provides a variety of con-
trols for adjusting plug-in parameters.
Rate
This controls sets the rate for the oscillation of
the LFO in Hertz.
Depth
This control sets the depth of LFO modulation of
the audio signal.
Chorus Section
The Chorus plug-in’s chorus section’s controls
let you select the amount of feedback and the
length of pre-delay.
Feedback Sets the Feedback amount.
Pre-Delay Delays the chorused signal, in milli-
seconds.
LFO Section
The Chorus plug-in’s LFO section’s controls let
you select the waveform, phase, rate, and depth
of modulation.
Waveform Selects either a Sine wave or a Trian-
gle wave for the LFO.
L/R Phase Sets the relative phase of the LFO’s
modulation in the left and right channels.
Mix
This control adjusts the Mix between the “wet”
(processed) and “dry” (unprocessed) signal. 0%
is all dry, and 100% is all wet, while 50% is an
equal mix of both.
Chorus plug-in window