Specifications

Chapter 36: Mod Delay III 227
Chapter 36: Mod Delay III
Mod Delay III provides mono, multi-mono,
mono-to-stereo, and stereo modulating delay ef-
fects. Mod Delay III is available in AAX and Au-
dioSuite formats, and supports 44.1 kHz,
48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and
192 kHz sample rates.
Mod Delay III Controls
Mod Delay III provides separate sections in the
plug-in window for Input and Output metering,
Delay and Modulation controls, and for the
Wet/Dry Mix control. Stereo and mono-to-ste-
reo versions provide meters and controls for
each channel. Delay, Modulation, and Mix con-
trols for stereo and mono-to-stereo instances of
Mod Delay III can be linked, or can be operated
independently.
Input
Input Meters
The Input meters show peak signal levels before
processing:
Dark Blue Indicates nominal levels from –INF to
–12 dB.
Light Blue Indicates pre-clipping levels, from
–12 dB to 0 dB.
Red Indicates clipping.
Phase Invert
The Phase Invert button at the top of the Input
section inverts the phase (polarity) of the input
signal, to help compensate for phase anomalies
that can occur either in multi-microphone envi-
ronments or because of mis-wired balanced con-
nections.
To enable (or disable) phase inversion on input:
 Click the Phase Invert button so that it is high-
lighted. Click it again so that it is not high-
lighted to disable it.
Mod Delay III plug-in (Mono shown)