Specifications

Chapter 33: AIR Dynamic Delay 219
Dynamic Delay Env Mod
(Envelope Modulation) Section
The Dynamic Delay plug-in provides an Enve-
lope follower that can control various parame-
ters in real time.
Rate
Adjust the Rate control to determine how
quickly the Feedback and Mix parameters re-
spond to input from the Envelope follower.
Fbk
Adjust the Feedback control to determine how
much the Envelope follower affects the Feedback
amount.
Mix
Adjust the Mix control to determine how much
the Envelope follower affects the wet/dry mix.
 At 0%, the Envelope follower has no effect on
the given parameter.
 At +100%, the parameter’s value is increased
in direct proportion to the incoming signal’s
amplitude envelope.
 At –100%, the parameter’s value is decreased
in direct proportion to the incoming signal’s am-
plitude envelope.
Dynamic Delay Feedback Modes
Select one of the following options for the Feed-
back Mode:
Mono Sums the incoming stereo signal to mono,
then offers separate left and right delay output
taps from that signal.
Stereo Processes the left and right channels of
the incoming stereo signal independently and
outputs the processed signal on the correspond-
ing left and right channels.
Cross Processes the left and right channels of
the incoming stereo signal independently, and
feeds the each side’s delayed signal back to the
opposite channel.