Specifications

Chapter 32: TL Space TDM and TL Space Native 205
Paste Pastes the clipboard into the currently se-
lected snapshot. Note that the name of the exist-
ing snapshot is not changed by pasting a new
snapshot, in order to avoid duplicate snapshot
names.
Clear Clears the IR from the currently selected
snapshot.
TL Space Preferences Mode
Preferences mode is selected using the Prefer-
ences icon at the top of the TL Space window.
This displays a number of preferences settings
for TL Space.
Embed IRs in Preset & Session Files Enables or
disables the embedding of IR waveforms in pre-
sets and session file. By default, this is enabled.
PCI Throttle Increasing the PCI throttle control
reduces PCI contention for Pro Tools systems
when using PCI video capture hardware. For
more information, see “PCI Bus Contention and
TL Space” on page 213.
For most users, this control should not be ad-
justed. This control is only displayed for TDM
instantiations of TL Space on Pro Tools|24 Mix
and Pro Tools|HD systems.
Installed IR Packages Displays a list of installed
TL Space IR packages and their versions.
TL Space Meters
The Meters display the amplitude of the incom-
ing and outgoing audio signals by channel. The
number of meters shown will depend on the
number of input and output channels. Input me-
ters may be mono or stereo, and output meters
may be mono, stereo, quad, or 5.0 channels.
Each meter is marked as either mono, left, right,
center, left surround, or right surround. A loga-
rithmic scale marked in decibels and momen-
tary peaks are also displayed on the meter.
The red Clip indicator indicates that audio for
that channel has exceeded 0 dB in amplitude.
When a channel has clipped once, the clip indi-
cator remains lit and additional clips will be
shown by a variation in the color of the indica-
tor. The clip indicator for all channels can be
cleared by clicking on any clip indicator, or se-
lecting the Pro Tools Clear All Clip Indicators
command.
The meters do not function when TL Space is
used as an AudioSuite plug-in.
Display area, Preferences mode
Meters, stereo input to 5.0 output shown