Specifications
Audio Plug-Ins Guide204
Channel Selectors
Displays from one to five
channels (in the order Left, Center, Right, Left
Surround, Right Surround). Click the desired
channel to display the IR waveform for that
channel. In Mono mode, no channel selector is
displayed.
Zoom
Zooms in and out on the time axis for the
waveform display.
TL Space Picture Preview Mode
Picture Preview mode is selected using the Pic-
ture Preview icon at the top of the TL Space win-
dow. When selected, Picture Preview mode
shows pictures associated with the IR. For an IR
provided with TL Space, this will usually include
a photograph of the location, and an image with
technical details such as microphones used or an
overview of the microphone setup. Thumbnails
of images are displayed in the right hand col-
umn. In this mode, the IR browser can be used to
view the associated pictures without loading the
IR itself.
TL Space Snapshot Mode
Snapshot mode is selected using the Snapshot
icon at the top of the TL Space window. TL Space
provides ten snapshots available at all times.
Each snapshot stores a separate IR waveform
and all control settings. Snapshots are opti-
mized for quick loading into the convolution
processor, and switching between snapshots is
considerably faster than loading a new IR. Snap-
shot mode allows all ten snapshots to be viewed
as well as the option to select, rename, copy,
paste, and clear snapshots.
The name of the currently selected snapshot is
always displayed in the Info bar at the bottom of
the display area, and can be automated. This lets
you switch reverb settings during playback and
is useful for post production sessions where the
reverb setting may change as the scene changes.
The active snapshot can be selected in one of two
ways. At any time, a snapshot can be selected by
using the snapshot menu in the Info bar. Alter-
natively, when the display area is in Snapshot
mode, a snapshot can be selected by clicking the
selection area next to the snapshot name.
Select
Lets you select which snapshot is cur-
rently loaded.
Name
Displays the name of each snapshot. By
default, snapshots are named “Snapshot 1”
through “Snapshot 10.” Snapshots can be re-
named by clicking on the snapshot name and en-
tering a new name followed by the Enter key
(Windows) or the Return key (Macintosh).
Sample Path
Displays the name of the IR se-
lected for each snapshot.
Copy
Copies the currently selected snapshot set-
tings into a clipboard.
Display area, Picture Preview mode
Display area, Snapshot mode