Specifications

Audio Plug-Ins Guide184
ReVibe Input/Output Meter
The Input/Output meter indicates the input sig-
nal and the ReVibe output. The range of this me-
ter is from 0 dB to –60 dB. The number of in-
put/output meters that operate simultaneously
ranges from a single meter for mono input and
output, up to five input/output meters for 5.0
and 5.1 multichannel processing. The meters
that operate depend on the channel format of
the track on which the plug-in is inserted.
Clip Indicators
A red channel clip indicator appears at the top of
each meter, and an internal clip meter appears
above the meter display itself. The clip indicator
lights when the signal level exceeds 0 dB, and
stays lit until the user clears it. Clicking a me-
ter’s clip indicator will clear that meter.
It is possible to clip internally even when input
levels are relatively low. This can occur because
a digital reverb is essentially a series of filters
and delays. Feedback within the signal paths can
cause buildup of the reverb signal, which can
cause the level to increase and overload (similar
to a delay line with a high level of feedback).
ReVibe Online Help Button
Click the name of any control and information
about that control will appear. Clicking the On-
line Help button provides additional details on
using this feature.
Input/Output Meter
internal clip indicator
channel clip indicator
Online Help