Specifications

Chapter 31: ReVibe 177
Front Control
Front controls the output level of the front left
and right outputs. Front is also the main level
control for stereo. The range of this control is
from –INF (minus infinity) to 0.0 dB.
Center Control
Center controls the output level of the center
channel outputs of multichannel formats that
have a center channel (such as LCR or 5.1).
When ReVibe is used in a multichannel format
that has no center channel (such as stereo or
quad), the Center level control adjusts a phan-
tom center channel signal that is center-panned
to the front left and right outputs.
The range of this control is from –INF (minus
infinity) to 0.0 dB.
Rear Reverb Control
Rear Reverb controls the output level of the rear
outputs of multichannel formats that have rear
channels (such as quad or 5.1).
When ReVibe is used in a multichannel format
that has no rear channels (such as a stereo or
LCR) the Rear level control instead adjusts rear
channel signals hard-panned to the front left
and right outputs.
The range of this control is from –INF (minus
infinity) to 0.0 dB.
Rear ER Control
Rear ER controls the output level of early reflec-
tions in the rear outputs. The range of this con-
trol is from –INF (minus infinity) to 0.0 dB.
Rear Level Link Button
The Rear Level Link button toggles linking of
the Rear Reverb and Rear ER controls on or off.
The Rear Reverb and the Rear ER controls are
linked by default. When linked, the Rear ER and
Rear Reverb controls move in tandem when ei-
ther is adjusted. When unlinked, the Rear ER
and the Rear Reverb controls can be adjusted in-
dependently.
ReVibe Room Type Section
Controls
The controls in the Room Type section let you
select a Room Type, which models early reflec-
tion characteristics for specific types of rooms
or effects devices. Each Room Type also incor-
porates a complex room coloration EQ, which
models the general frequency response of vari-
ous rooms and effects devices.
Choosing a new Room Type changes the early re-
flections and room coloration EQ only. All of the
other ReVibe parameters and setting remain un-
changed. To create a preset that includes all pa-
rameters, use the Plug-In Settings menu.
The Rear ER control has no effect when the
early reflections are turned off with the ER
On/Off button.
Rear Level Link button
For more information on saving and im-
porting plug-in presets, see the Pro Tools
Reference Guide.