Specifications

Chapter 31: ReVibe 173
To change control values with a computer
keyboard:
1 Click on the parameter text that you want to
edit.
2 Change the value by doing one of the follow-
ing.
• To increase a value, press the Up Arrow on
your keyboard. To decrease a value, press
the Down Arrow on your keyboard.
– or –
• Type the desired value.
3 Do one of the following:
• Press Enter on the numeric keyboard to in-
put the value and remain in keyboard edit-
ing mode.
– or –
• Press Enter on the alpha keyboard (Win-
dows) or Return (Mac) to enter the value
and leave keyboard editing mode.
Enabling Switches
To enable a switch, click on the switch (the
round LED indicator next to each switch name).
Switch LEDs illuminate when enabled.
ReVibe Controls
ReVibe has a variety of controls for producing a
wide range of reverb effects. Controls can be ad-
justed by dragging their sliders, typing values
directly in their text boxes, and adjusted on the
Decay Color & EQ graph displays.
ReVibe Master Mix Section
Controls
The Master Mix section has controls for adjust-
ing the relative levels of the source signal and
the reverb effect.
Wet/Dry Control
Wet/Dry adjusts the mix between the dry, un-
processed signal and the reverb effect. If you in-
sert the ReVibe plug-in directly onto an audio
track, settings from 30% to 60% are a good start-
ing point for experimenting with this parame-
ter. The range of this control is from 0% to
100%.
For parameters with values in kilohertz,
typing “k” after a number value will multi-
ply the value by 1000. For example, type
“8k” to enter a value of 8000.
To move from a selected parameter to the
next parameter, press the Tab key. To move
backward, press Shift+Tab.
Early Reflection switch LED (on)
Master Mix controls
You can also achieve a 100% wet mix by
clicking the 100% Wet Mix button.